Click image to view full size image
The basis technical data as below:
1.Basic form: stationary type, double working arms;
2.Control mode: local control / remote control;
3.Max. / Min. working semidiameter: ~12m/ ~4m;
4.Slewing angle/cycle: 360°/60s;
5.Main Arm:
Length/working angle: 7750mm/0~60°;
6.Working arm 1: lifting arm, length:5150mm;
Main function: lifting, hooking mooring rigging;
Lifting capacity: 3t X 12m, >27.6m/min; lifting height:~30m;
Hooking rigging: hook the tensionless rigging
7.Working arm 2: Multifunction, length:4950mm;
Main function: Hook anchor chain, hook wirerope;
The multifunction head on the multifuncation arm with two grab handles; which can slew 360°, swing on horizontal and vertical;
Grab handles: hook the anchor chain, cutting the wirerope after installing when install the cutting tool; grab and hold the wirerope;
Max. workload: 10KN.
1.Basic form: stationary type, double working arms;
2.Control mode: local control / remote control;
3.Max. / Min. working semidiameter: ~12m/ ~4m;
4.Slewing angle/cycle: 360°/60s;
5.Main Arm:
Length/working angle: 7750mm/0~60°;
6.Working arm 1: lifting arm, length:5150mm;
Main function: lifting, hooking mooring rigging;
Lifting capacity: 3t X 12m, >27.6m/min; lifting height:~30m;
Hooking rigging: hook the tensionless rigging
7.Working arm 2: Multifunction, length:4950mm;
Main function: Hook anchor chain, hook wirerope;
The multifunction head on the multifuncation arm with two grab handles; which can slew 360°, swing on horizontal and vertical;
Grab handles: hook the anchor chain, cutting the wirerope after installing when install the cutting tool; grab and hold the wirerope;
Max. workload: 10KN.